Category Archives: Films and sheets

BS EN 1849-2:2001 – Flexible sheets for waterproofing. Determination of thickness and mass per unit area. Plastic and rubber sheets for roof waterproofing

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 10 pages, A4

Manufacturer – BSI

Price – GBP 64

CLICK HERE FOR MORE INFORMATION

Keywords – Waterproof materials, Sheet materials, Flexible materials, Thickness measurement, Mass, Waterproofing materials, Sheet roof coverings, Plastics, Rubber, Polymers, Elastomers, Plastics and rubber technology, Construction systems parts, Weather protection systems
|

BS EN 1848-2:2001 – Flexible sheets for waterproofing. Determination of length, width and straightness. Plastic and rubber sheets for roof waterproofing

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 10 pages, A4

Manufacturer – BSI

Price – GBP 64

CLICK HERE FOR MORE INFORMATION

Keywords – Waterproof materials, Sheet materials, Flexible materials, Length measurement, Length, Width measurement, Width, Straightness measurement, Dimensional measurement, Flatness measurement, Sheet roof coverings, Waterproofing materials, Plastics, Rubber, Rolls
|

BS EN 1850-2:2001 – Flexible sheets for waterproofing. Determination of visible defects. Plastic and rubber sheets for roof waterproofing

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 8 pages, A4

Manufacturer – BSI

Price – GBP 64

CLICK HERE FOR MORE INFORMATION

Keywords – Waterproof materials, Sheet materials, Flexible materials, Visual inspection (testing), Defects, Plastics, Plastics and rubber technology, Rubber, Sheet roof coverings, Weather protection systems, Construction systems parts
|

BS EN ISO 2556:2001 – Plastics. Determination of the gas transmission rate of films and thin sheets under atmospheric pressure. Manometric method

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 16 pages, A4

Manufacturer – BSI

Price – GBP 80

CLICK HERE FOR MORE INFORMATION

Keywords – Plastics and rubber technology, Plastics, Polymers, Films (states of matter), Sheet materials, Diffusion, Gases, Pressure measurement (fluids), Test pressure, Test equipment, Test specimens, Testing conditions, Permeability measurement
|

BS EN ISO 15106-1:2005 – Plastics. Film and sheeting. Determination of water vapour transmission rate. Humidity detection sensor method

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 14 pages, A4

Manufacturer – ISO

Price – GBP 64

CLICK HERE FOR MORE INFORMATION

Keywords – Mathematical calculations, Humidity measurement, Humidity control, Probes, Plastics, Plastics and rubber technology, Plastics sheet, Sheet materials, Films (states of matter), Plastic films, Water-vapour tests, Water vapour, Permeability measurement
|

BS EN ISO 15106-2:2005 – Plastics. Film and sheeting. Determination of water vapour transmission rate. Infrared detection sensor method

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 14 pages, A4

Manufacturer – ISO

Price – GBP 64

CLICK HERE FOR MORE INFORMATION

Keywords – Probes, Infrared radiation, Plastics, Plastics and rubber technology, Plastics sheet, Sheet materials, Plastic films, Films (states of matter), Water-vapour tests, Water vapour, Permeability measurement
|

BS EN ISO 15106-3:2005 – Plastics. Film and sheeting. Determinaktion of water vapour transmission rate. Electrolytic detection sensor method

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 16 pages, A4

Manufacturer – ISO

Price – GBP 64

CLICK HERE FOR MORE INFORMATION

Keywords – Electro-analytical methods, Electrolytic devices, Probes, Plastics, Plastics and rubber technology, Plastics sheet, Sheet materials, Plastic films, Films (states of matter), Water-vapour tests, Water vapour, Permeability measurement
|

BS ISO 15987:2003 – Plastics. Film and sheeting. Biaxially oriented polyamide (nylon) films

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 14 pages, A4

Manufacturer – ISO

Price – GBP 64

CLICK HERE FOR MORE INFORMATION

Keywords – Polyamides, Plastics, Films (states of matter), Sheet materials, Packaging materials
|

BS EN ISO 527-3:1996, BS 2782-3:Method 326E:1995 – Plastics. Determination of tensile properties. Test conditions for films and sheets

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 12 pages, A4

Manufacturer – BSI

Price – GBP 64

CLICK HERE FOR MORE INFORMATION

Keywords – Plastics, Polymers, Films (states of matter), Sheet materials, Tensile testing, Mechanical testing, Elongation, Testing conditions, Test specimens, Shape, Dimensions
|

BS EN ISO 14616:2004 – Plastics. Heatshrinkable films of polyethylene, ethylene copolymers and their mixtures. Determination of the shrinkage stress and contraction stress

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 12 pages, A4

Manufacturer – BSI

Price – GBP 64

CLICK HERE FOR MORE INFORMATION

Keywords – Heat-shrinkable materials, Films (states of matter), Polyethylene, Ethylene, Copolymers, Shrinkage tests, Stress, Strain measurement, Force measurement, Plastics, Thermoplastic polymers, Sheet materials, Test specimens, Test equipment, Mathematical calculations
|

BS EN ISO 7765-1:2004 – Plastics film and sheeting. Determination of impact resistance by the free-falling dart method. Staircase methods

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 16 pages, A4

Manufacturer – BSI

Price – GBP 80

CLICK HERE FOR MORE INFORMATION

Keywords – Plastics, Sheet materials, Films (states of matter), Impact testing, Mechanical testing, Plastics and rubber technology, Shock rupture tests, Impact strength, Thickness, Test specimens, Test equipment
|

BS EN ISO 6383-1:2004 – Plastics. Film and sheeting. Determination of tear resistance. Trouser tear method

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 14 pages, A4

Manufacturer – BSI

Price – GBP 64

CLICK HERE FOR MORE INFORMATION

Keywords – Plastics, Polymers, Sheet materials, Films (states of matter), Tear tests, Tensile testing, Mechanical testing, Plastics and rubber technology, Tear strength, Test specimens, Test equipment
|

BS EN ISO 6383-2:2004 – Plastics. Film and sheeting. Determination of tear resistance. Elmendorf method

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 16 pages, A4

Manufacturer – BSI

Price – GBP 80

CLICK HERE FOR MORE INFORMATION

Keywords – Plastics and rubber technology, Plastics, Polymers, Tear tests, Films (states of matter), Sheet materials, Test specimens, Specimen preparation, Testing conditions, Test equipment, Reports, Visual inspection (testing), Calibration, Dimensions, Maintenance
|

BS EN ISO 11501:2004, ISO 11501:1995 – Plastics. Film and sheeting. Determination of dimensional change on heating. Determination of dimensional change on heating of film and sheeting

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 10 pages, A4

Manufacturer – BSI

Price – GBP 64

CLICK HERE FOR MORE INFORMATION

Keywords – Plastics and rubber technology, Plastics, Polymers, Thermoplastic polymers, Sheet materials, Films (states of matter), Film properties testing, Shrinkage tests, Thermal testing, Heating tests, Dimensional changes, Dimensional measurement, Test specimens, Testing conditions, Temperature
|

BS EN ISO 8295:2004 – Plastics. Film and sheeting. Determination of the coefficients of friction

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 15 pages, A4

Manufacturer – BSI

Price – GBP 80

CLICK HERE FOR MORE INFORMATION

Keywords – Plastics and rubber technology, Plastics, Sheet materials, Films (states of matter), Friction, Friction tests, Physical testing, Test equipment, Test specimens, Precision
|

BS EN ISO 11502:2005, ISO 11502:1995 – Plastics. Film and sheeting. Determination of blocking resistance

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 14 pages, A4

Manufacturer – BSI

Price – GBP 64

CLICK HERE FOR MORE INFORMATION

Keywords – Plastics and rubber technology, Plastics, Polymers, Films (states of matter), Sheet materials, Adhesion tests, Test specimens, Dimensions, Test equipment, Specimen preparation, Testing conditions
|

BS EN 263:2008 – Sanitary appliances. Crosslinked cast acrylic sheets for baths and shower trays for domestic purposes

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 14 pages, A4

Manufacturer – BSI

Price – GBP 64

CLICK HERE FOR MORE INFORMATION

Keywords – Acrylic resins, Sheet materials, Moulded materials, Baths, Showers, Sanitary appliances, Domestic, Cross-linked materials
|

BS 7344:1990 – Specification for reeled low density polyethylene film for general purpose application

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 12 pages, A4

Manufacturer – BSI

Price – GBP 40

CLICK HERE FOR MORE INFORMATION

Keywords – Plastics, Polyethylene, Films (states of matter), Thickness, Width, Length, Dimensional tolerances, Density, Classification systems, Impact strength, Specimen preparation, Marking, Polymers, Grades (quality), Designations, Gloss (of surface), Optical properties of materials, Sheet materials, Testing conditions, Friction, Mechanical testing, Flexible tubing
|

BS 7476:1991 – Specification for polyethylene film for covering silage

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 8 pages, A4

Manufacturer – BSI

Price – GBP 30

CLICK HERE FOR MORE INFORMATION

Keywords – Polyethylene, Plastics, Films (states of matter), Sheet materials, Flexible materials, Silage, Thickness, Density, Dimensional tolerances, Weight tolerances, Tensile strength, Elongation at fracture, Marking, Specimen preparation, Testing conditions, Test specimens
|

BS EN 1013-2:1999 – Light transmitting profiled plastic sheeting for single skin roofing. Specific requirements and test methods for sheets of glass fibre reinforced polyester resin (GRP)

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 10 pages, A4

Manufacturer – BSI

Price – GBP 64

CLICK HERE FOR MORE INFORMATION

Keywords – Sheet roof coverings, Plastics, Transparency, Roof coverings, Roofs, Sheet materials, Corrugated, Construction systems parts, Polyesters, Glass fibres, Reinforced materials, Grades (quality), Weight (mass), Thickness, Visual inspection (testing), Defects, Hardness, Tensile stress, Protective coatings, Surface treatment, Type testing, Determination of content, Weight measurement, Thickness measurement, Barcol impressor tests, Adhesion tests, Density measurement, Laminates
|

BS EN ISO 14631:1999 – Extruded sheets of impact-modified polystyrene (PS-I). Requirements and test methods

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 18 pages, A4

Manufacturer – BSI

Price – GBP 80

CLICK HERE FOR MORE INFORMATION

Keywords – Plastics, Polystyrene, Extruding, Sheet materials, Rolls, Defects, Dimensional tolerances, Thickness, Length, Width, Form tolerances, Mechanical properties of materials, Strength of materials, Tensile strain, Modulus of elasticity, Impact strength, Hardness, Thermal properties of materials, Softening point, Shrinkage, Dimensional changes, Specimen preparation, Dimensional measurement, Thickness measurement, Accuracy, Rectangular shape, Curved, Performance testing, Approval testing, Shrinkage tes
|

BS EN 1013-4:2000 – Light transmitting profiled plastic sheeting for single skin roofing. Specific requirements, test methods and performance of polycarbonate (PC) sheets

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 10 pages, A4

Manufacturer – BSI

Price – GBP 64

CLICK HERE FOR MORE INFORMATION

Keywords – Sheet roof coverings, Plastics, Transparency, Roof coverings, Roofs, Sheet materials, Corrugated, Construction systems parts, Construction materials, Performance, Polycarbonates, Extruding, Single, Thickness, Durability, Impact resistance tests, Ageing tests, Thermal testing
|

BS EN 1013-5:2000 – Light transmitting profiled plastic sheeting for single skin roofing. Specific requirements, test methods and performance of polymethylmethacrylate (PMMA) sheets

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 10 pages, A4

Manufacturer – BSI

Price – GBP 64

CLICK HERE FOR MORE INFORMATION

Keywords – Sheet roof coverings, Plastics, Transparency, Roof coverings, Roofs, Sheet materials, Corrugated, Construction systems parts, Performance testing, Polymethyl methacrylate, Quality control, Type testing, Impact strength, Thermal testing, Ageing tests
|

BSENISO7823-1 : 2003 – BSENISO7823-1 : 2003 Plastics- Poly(methyl methacrylate) sheets- Types, dimensions and characteristics. Part 1: Cast sheets

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 18 pages

Manufacturer – BSI

Price – GBP 80

CLICK HERE FOR MORE INFORMATION

Keywords – Films and sheets
|

BS ISO 15988:2003 – Plastics. Film and sheeting. Biaxially oriented poly(ethylene terephthalate) (PET) films

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 14 pages, A4

Manufacturer – BSI

Price – GBP 64

CLICK HERE FOR MORE INFORMATION

Keywords – Polyethylene, Terephthalates, Sheet materials, Films (states of matter), Thermoplastic polymers, Plastics, Packaging materials
|

BS ISO 8296:2003 – Plastics. Film and sheeting. Determination of wetting tension

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 10 pages, A4

Manufacturer – BSI

Price – GBP 64

CLICK HERE FOR MORE INFORMATION

Keywords – Plastics, Films (states of matter), Sheet materials, Surface tension, Wettability, Physical property measurement, Surface properties, Adhesives, Coatings, Solvents, Inks
|

BS ISO 15105-2:2003 – Plastics. Film and sheeting. Determination of gas-transmission rate. Equal-pressure method

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 22 pages, A4

Manufacturer – BSI

Price – GBP 80

CLICK HERE FOR MORE INFORMATION

Keywords – Plastics and rubber technology, Plastics, Polymers, Films (states of matter), Sheet materials, Diffusion, Gases, Flow rates, Pressure measurement (fluids), Permeability measurement, Extruding, Flexible materials, Coulometric methods
|

BS ISO 17557:2003 – Plastics. Film and sheeting. Cast polypropylene (PP) films

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 10 pages, A4

Manufacturer – BSI

Price – GBP 64

CLICK HERE FOR MORE INFORMATION

Keywords – Polypropylene, Sheet materials, Films (states of matter), Thermoplastic polymers, Plastics, Packaging materials, Dimensions, Properties
|

BS ISO 17555:2003 – Plastics. Film and sheeting. Biaxially oriented polypropylene (PP) films

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 14 pages, A4

Manufacturer – BSI

Price – GBP 64

CLICK HERE FOR MORE INFORMATION

Keywords – Polypropylene, Sheet materials, Films (states of matter), Packaging materials, Plastics, Thermoplastic polymers, Dimensions, Properties
|

BS EN ISO 7823-2:2003 – Plastics. Poly(methyl methacrylate) sheets. Types, dimensions and characteristics. Extruded sheets

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 22 pages, A4

Manufacturer – BSI

Price – GBP 80

CLICK HERE FOR MORE INFORMATION

Keywords – Plastics, Plastics sheet, Polymethyl methacrylate, Sheet materials, Dimensions, Acrylic resins, Polyacrylates, Extruding, Dimensional tolerances, Polymers, Thermoplastic polymers, Physical properties of materials
|

BS EN ISO 7823-1:2003 – Plastics. Poly(methyl methacrylate) sheets. Types, dimensions and characteristics. Cast sheets

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 20 pages, A4

Manufacturer – BSI

Price – GBP 80

CLICK HERE FOR MORE INFORMATION

Keywords – Plastics, Plastics sheet, Polymethyl methacrylate, Sheet materials, Dimensions, Acrylic resins, Polyacrylates, Castings, Thickness
|

03/119348 DC – prEN 1013-1. Light transmitting single skin profiled plastics sheeting for internal and external roofing, wall cladding and ceiling finishes. Part 1: General requirements and test methods

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 38 pages, A4

Manufacturer – BSI

Price – GBP 20

CLICK HERE FOR MORE INFORMATION

Keywords – Transmittance, Light, Roof coverings, Wall cladding, Ceiling finishes, Ceilings, Plastics, Plastics sheet, Internal, External
|

BS ISO 23559:2007 – Plastics. Film and sheeting. Guidance on the testing of thermoplastic films

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 18 pages, A4

Manufacturer – BSI

Price – GBP 80

CLICK HERE FOR MORE INFORMATION

Keywords – Plastics, Thermoplastic polymers, Films (states of matter), Plastics sheet, Sheet materials, Testing
|

BS EN ISO 11833-1:2007 – Plastics. Unplasticized poly(vinyl chloride) sheets. Types, dimensions and characteristics. Sheets of thickness not less than 1 mm

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 22 pages, A4

Manufacturer – BSI

Price – GBP 72

CLICK HERE FOR MORE INFORMATION

Keywords – Plastics, Sheet materials, Unplasticized polyvinyl chloride, Polyvinyl chloride, Dimensions, Thickness, Classification systems, Surface texture, Dimensional tolerances, Rectangular shape, Mechanical properties of materials, Thermal properties of materials, Softening point, Dimensional changes, Optical properties of materials, Luminescence, Thermal testing, Marking, Designations, Impact testing, Bend testing, Test equipment, Test specimens, Specimen preparation
|

BS ISO 15105-1:2007 – Plastics. Film and sheeting. Determination of gas-transmission rate. Differential-pressure methods

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 20 pages, A4

Manufacturer – BSI

Price – GBP 72

CLICK HERE FOR MORE INFORMATION

Keywords – Plastics and rubber technology, Plastics, Polymers, Films (states of matter), Sheet materials, Plastics sheet, Diffusion, Gases, Flow rates, Permeability measurement, Pressure measurement (fluids), Gas chromatography
|

BS EN ISO 15013:2007 – Plastics. Extruded sheets of polypropylene (PP). Requirements and test methods

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 20 pages, A4

Manufacturer – BSI

Price – GBP 72

CLICK HERE FOR MORE INFORMATION

Keywords – Plastics, Polypropylene, Sheet materials, Extruding, Polymers, Thickness, Smoothness (surface), Dimensional tolerances, Length, Width, Mechanical behaviour of materials, Thermal properties of materials, Tensile strength, Shrinkage, Flat (shape)
|

06/30144978 DC – EN ISO 15014. Plastics. Extruded sheets of poly(vinylidene fluoride) (PVDF). Requirements and test methods

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 17 pages, A4

Manufacturer – BSI

Price – GBP 20

CLICK HERE FOR MORE INFORMATION

Keywords – Plastics, Plastics and rubber technology, Laminated plastics sheet, Polyvinylidene fluoride, Fluorocarbon polymers, Vinyl resins
|

BS EN ISO 7823-3:2007 – Plastics. Poly(methacrylate) sheets. Types, dimensions and characteristics. Continuous cast sheets

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 18 pages, A4

Manufacturer – BSI

Price – GBP 72

CLICK HERE FOR MORE INFORMATION

Keywords – Plastics, Plastics sheet, Polymethyl methacrylate, Sheet materials, Dimensions, Acrylic resins, Polyacrylates, Polymers, Continuous, Castings, Physical properties of materials
|

BS EN ISO 11833-2:2006 – Plastics. Unplasticized poly(vinyl chloride) sheets. Types, dimensions and characteristics. Sheets of thickness less than 1 mm

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 16 pages, A4

Manufacturer – BSI

Price – GBP 64

CLICK HERE FOR MORE INFORMATION

Keywords – Plastics, Sheet materials, Unplasticized polyvinyl chloride, Polyvinyl chloride, Dimensions, Classification systems, Thickness, Dimensional tolerances, Colour, Defects, Length, Width, Tensile stress, Strain, Elongation at fracture, Impact strength, Softening-point determination, Thermal properties of materials, Chemical properties, Specimen preparation, Dimensional measurement, Marking, Visual inspection (testing), Tolerances (measurement)
|

BS ISO 15527:2007 – Plastics. Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD). Requirements and test methods

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 18 pages, A4

Manufacturer – BSI

Price – GBP 72

CLICK HERE FOR MORE INFORMATION

Keywords – Plastics, Polyethylene, Sheet materials, Plastics sheet, Compression moulding, Moulded materials, Thermoplastic polymers, Dimensional tolerances, Dimensions, Physical properties of materials, Testing conditions, Designations
|

BS 3012:1970 – Specification for low and intermediate density polythene sheet for general purposes

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 24 pages, A5

Manufacturer – BSI

Price – GBP 80

CLICK HERE FOR MORE INFORMATION

Keywords – Polyethylene, Sheet materials, Polymers, Plastics, Density, Composition, Carbon black, Antioxidants, Colour, Thickness, Dimensions, Tensile strength, Dimensional changes, Marking, Determination of content
|

BS 3757:1978 – Specification for rigid PVC sheet

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 8 pages, A4

Manufacturer – BSI

Price – GBP 30

CLICK HERE FOR MORE INFORMATION

Keywords – Polyvinyl chloride, Sheet materials, Polymers, Plastics, Thickness, Dimensions, Softening point, Tensile strength, Modulus of elasticity, Dimensional changes, Impact testing, Test specimens, Heating tests, Testing conditions, Mechanical testing
|

BS 4203-1:1980 – Extruded rigid PVC corrugated sheeting. Specification for performance requirements

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 12 pages, A4

Manufacturer – BSI

Price – GBP 40

CLICK HERE FOR MORE INFORMATION

Keywords – Polyvinyl chloride, Sheet materials, Construction materials, Extruding, Corrugated, Plastics, Polymers, Thermal stability, Thermal testing, Thickness, Deflection tests, Deformation, Marking, Transparency, Photometry (light measurement), Optical measurement, Test specimens, Testing conditions, Heating tests, Impact testing, Test equipment, Colour-fastness tests
|

BS 4203-2:1980 – Extruded rigid PVC corrugated sheeting. Specification for profiles and dimensions

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 4 pages, A4

Manufacturer – BSI

Price – GBP 30

CLICK HERE FOR MORE INFORMATION

Keywords – Polyvinyl chloride, Sheet materials, Construction materials, Extruding, Corrugated, Plastics, Polymers, Width, Thickness, Dimensions, Profile, Shape
|

BS 2782-6:Method 641A:1983 – Methods of testing plastics. Dimensional properties. Determination of dimensional stability at 100°C of flexible polyvinyl chloride sheet

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 4 pages, A4

Manufacturer – BSI

Price – GBP 30

CLICK HERE FOR MORE INFORMATION

Keywords – Plastics and rubber technology, Plastics, Polyvinyl chloride, Flexible materials, Sheet materials, Polymers, Shrinkage tests, Shrinkage, Dimensional measurement, Length measurement, Thermal testing, Test specimens, Dimensions, Specimen preparation, Testing conditions
|

BS 2782-6:Method 643A:1976 – Methods of testing plastics. Dimensional properties. Shrinkage on heating of film intended for shrink wrapping applications

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 2 pages, A4

Manufacturer – BSI

Price – GBP 30

CLICK HERE FOR MORE INFORMATION

Keywords – Plastics and rubber technology, Plastics, Polymers, Films (states of matter), Packaging materials, Wrapping, Shrink wrapping, Shrinkage tests, Thermal testing, Shrinkage, Dimensional measurement, Test specimens, Dimensions, Testing conditions, Test equipment, Design
|

BS 2782-3:Method 360C:1991 – Methods of testing plastics. Mechanical properties. Determination of tear resistance of plastics film and sheeting by the initiation method

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 6 pages, A4

Manufacturer – BSI

Price – GBP 30

CLICK HERE FOR MORE INFORMATION

Keywords – Plastics and rubber technology, Plastics, Polymers, Sheet materials, Tear tests, Test equipment, Test specimens, Specimen preparation, Flexible materials, Tensile testing
|

BS 2782-8:Method 822A:1992 – Methods of testing plastics. Other properties. Determination of water vapour transmission rate of plastics films (sachet method)

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 6 pages, A4

Manufacturer – BSI

Price – GBP 30

CLICK HERE FOR MORE INFORMATION

Keywords – Plastics and rubber technology, Plastics, Thermoplastic polymers, Polymers, Water-vapour tests, Watertightness tests, Leak tests, Films (states of matter), Test specimens, Specimen preparation, Testing conditions
|

BS 2782-5:Method 521A:1992 – Methods of testing plastics. Optical and colour properties, weathering. Determination of haze of film and sheet

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 8 pages, A4

Manufacturer – BSI

Price – GBP 30

CLICK HERE FOR MORE INFORMATION

Keywords – Plastics and rubber technology, Plastics, Optical properties of materials, Weathering, Colorimetric characteristics, Polymers, Films (states of matter), Sheet materials, Transparency, Transmittance, Diffusion (waves), Optical measurement, Test equipment, Testing conditions, Test specimens, Formulae (mathematics)
|

BS 2782-8:Method 826A:1992 – Methods of testing plastics. Other properties. Determination of adhesion of print on plastics sheet

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 8 pages, A4

Manufacturer – BSI

Price – GBP 30

CLICK HERE FOR MORE INFORMATION

Keywords – Plastics and rubber technology, Plastics, Sheet materials, Printing, Adhesion tests, Wear tests, Testing conditions, Test specimens, Specimen preparation, Test equipment
|

BS 2782-6:Method 632A:1993, ISO 4592:1992 – Methods of testing plastics. Dimensional properties. Determination of length and width of flexible sheet

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 6 pages, A4

Manufacturer – BSI

Price – GBP 30

CLICK HERE FOR MORE INFORMATION

Keywords – Plastics and rubber technology, Plastics, Polymers, Films (states of matter), Sheet materials, Rolls, Length measurement, Width measurement, Testing conditions, Flexible materials
|

BS 2782-6:Method 631A:1993, ISO 4591:1992 – Methods of testing plastics. Dimensional properties. Determination of gravimetric thickness and yield of flexible sheet

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 6 pages, A4

Manufacturer – BSI

Price – GBP 30

CLICK HERE FOR MORE INFORMATION

Keywords – Plastics and rubber technology, Plastics, Polymers, Films (states of matter), Sheet materials, Rolls, Embossed, Thickness measurement, Testing conditions, Test specimens, Flexible materials, Weight measurement
|

BS 2782-6:Method 630A:1994, ISO 4593:1993 – Methods of testing plastics. Dimensional properties. Determination of thickness by mechanical scanning of flexible sheet

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 6 pages, A4

Manufacturer – BSI

Price – GBP 30

CLICK HERE FOR MORE INFORMATION

Keywords – Plastics and rubber technology, Plastics, Polymers, Sheet materials, Films (states of matter), Flexible materials, Thickness measurement, Accuracy, Dimensional measurement, Mechanical measurement, Linear measuring instruments, Testing conditions, Test specimens
|

DC95/121477 – Plastics. Poly(methyl methacrylate) sheets. Types, dimensions and characteristics. Part 2. Melt-calendered extruded sheets (ISO/DIS 7823-2)

Available as PDF document for immediate download, or as printed publication – yes

Number of pages –

Manufacturer – BSI

Price – GBP 13

CLICK HERE FOR MORE INFORMATION

Keywords – Films and sheets
|

BS EN 1013-1:1998 – Light transmitting profiled plastic sheeting for single skin roofing. General requirements and test methods

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 18 pages, A4

Manufacturer – BSI

Price – GBP 80

CLICK HERE FOR MORE INFORMATION

Keywords – Sheet roof coverings, Plastics, Transparency, Roof coverings, Roofs, Sheet materials, Corrugated, Construction systems parts, Dimensions, Dimensional tolerances, Optical properties of materials, Classification systems, Marking, Visual inspection (testing), Type testing, Impact testing, Environmental testing, Thickness measurement, Width measurement, Length measurement, Straightness measurement, Ageing tests, Quality control, Test equipment, Test specimens, Testing conditions, Conformity
|

BS EN 1013-3:1998 – Light transmitting profiled plastic sheeting for single skin roofing. Specific requirements and test methods for sheets of polyvinyl chloride (PVC)

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 10 pages, A4

Manufacturer – BSI

Price – GBP 64

CLICK HERE FOR MORE INFORMATION

Keywords – Sheet roof coverings, Plastics, Transparency, Roof coverings, Roofs, Sheet materials, Corrugated, Construction systems parts, Polyvinyl chloride, Thickness, Performance, Impact strength, Ageing (materials), Thermal resistance, Visual inspection (testing), Performance testing, Thickness measurement, Tensile testing, Impact testing, Ageing tests, Heat ageing tests, Mechanical testing, Test specimens, Testing conditions, Test equipment
|

BS EN ISO 15015:2007 – Plastics. Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA). Requirements and test methods

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 20 pages, A4

Manufacturer – BSI

Price – GBP 72

CLICK HERE FOR MORE INFORMATION

Keywords – Plastics, Acrylonitrile butadiene styrene, Copolymers, Plastics sheet, Extruding, Sheet materials, Thermoplastic polymers, Dimensions, Mechanical properties of materials, Thermal properties of materials, Physical properties of materials, Designations, Testing
|

08/30181778 DC – BS EN 15836-1. Plastics. Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools. Part 1. Homogenous membranes of nominal thickness equal to or greater than 0,75 mm

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 20 pages, A4

Manufacturer – BSI

Price – GBP 20

CLICK HERE FOR MORE INFORMATION

Keywords – Plastics, Plastics and rubber technology, Polyvinyl chloride, Plasticized polyvinyl chloride, Swimming pools, Membranes
|

08/30181781 DC – BS EN 15836-2. Plastics. Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools. Part 2. Reinforced membranes of nominal thickness equal to or greater than 1,5 mm

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 23 pages, A4

Manufacturer – BSI

Price – GBP 20

CLICK HERE FOR MORE INFORMATION

Keywords – Sealing processes, Heat pumps, Air-conditioning systems, Refrigeration, Refrigerating systems, Reinforced materials
|

BS EN ISO 11963:1996 – Plastics. Polycarbonate sheets. Types, dimensions and characteristics

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 16 pages, A4

Manufacturer – BSI

Price – GBP 64

CLICK HERE FOR MORE INFORMATION

Keywords – Polycarbonates, Thermoplastic polymers, Polymers, Plastics, Sheet materials, Thickness, Composition, Testing conditions, Length, Width, Dimensional tolerances, Colour, Form tolerances, Shrinkage, Tensile strength, Modulus of elasticity, Elongation at fracture, Impact strength, Softening point, Transparency, Thermal expansion, Density, Refractive index, Electrical resistance, Water absorption, Weathering
|

BS 2782-8:Method 820A:1996, ISO 2528:1995 – Methods of testing plastics. Other properties. Determination of water vapour transmission rate (dish method)

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 18 pages, A4

Manufacturer – BSI

Price – GBP 80

CLICK HERE FOR MORE INFORMATION

Keywords – Plastics and rubber technology, Plastics, Permeability measurement, Packaging materials, Water vapour, Water-vapour tests, Sheet materials, Flexible materials, Testing conditions, Specimen preparation, Test equipment, Creasing tests, Test specimens, Films (states of matter), Polymers, Laminates, Coated fabrics, Rubber coatings, Gravimetric analysis, Sealing wax, Mathematical calculations
|

DC96/121809 – ISO/DIS 14616. Plastics. Heat-shrinkable films of polyethylene, ethylene copolymers and their mixtures. Determination of shrinkage stress and contraction stress

Available as PDF document for immediate download, or as printed publication – yes

Number of pages –

Manufacturer – BSI

Price – GBP 13.5

CLICK HERE FOR MORE INFORMATION

Keywords – Films and sheets
|

BS 2782-3:Method 352F:1996, ISO 7765-2:1994 – Methods of testing plastics. Mechanical properties. Determination of impact resistance by the free-falling dart method (instrumented puncture test)

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 16 pages, A4

Manufacturer – BSI

Price – GBP 80

CLICK HERE FOR MORE INFORMATION

Keywords – Plastics and rubber technology, Plastics, Films (states of matter), Sheet materials, Impact testing, Thickness, Test equipment, Testing conditions, Specimen preparation, Sampling methods, Penetration tests, Reports
|

BS EN ISO 12017:1996 – Plastics. Poly(methyl methacrylate) double- and triple-skin sheets. Test methods

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 24 pages, A4

Manufacturer – BSI

Price – GBP 80

CLICK HERE FOR MORE INFORMATION

Keywords – Polymethyl methacrylate, Plastics, Polymers, Quality control, Sheet materials, Walls, Extruding, Double, Triple, Width, Construction materials, Agricultural materials, Dimensional measurement, Weight measurement, Dimensions, Curvature, Visual inspection (testing), Bend testing, Artificial weathering tests, Chemical-resistance tests, Optical measurement, Transmittance, Corrosion tests, Stress corrosion
|

BS 6076:1996 – Specification for polymeric film for use as a protective sleeving for buried iron pipes and fittings (for site and factory application)

Available as PDF document for immediate download, or as printed publication – yes

Number of pages – 18 pages, A4

Manufacturer – BSI

Price – GBP 80

CLICK HERE FOR MORE INFORMATION

Keywords – Pipe coatings, Cast-iron pipelines, Pipelines, Pipes, Pipe fittings, Cast-iron, Polyethylene, Polymers, Plastics, Sheet materials, Tubular shape, Flexible tubing, Sleeves (mechanical components), Corrosion protection, Underground, Contaminants, Compositional tolerances, Width, Tensile strength, Impact strength, Strength of materials, Elongation, Marking, Packaging, Mechanical properties of materials, Ageing (materials), Adhesion tests, Films (states of matter), Repair, Additives, Dimensions
|